Waldbeck Azteca Manual De Instrucciones página 34

EN
34
5. MEMORY mode test
a. Press the MODE button again, the
MEMORY cursor is lighted. And
the target discrimination cursor is
all lighted.
b. If the operator envisages to search
silver coin and rejects the other
metals, the following operations
can be carried out:
Let the silver coin scan above
the search coil about 7-10cm,the
target discrimination cursor that
the silver coin corresponding
to continues lighting, while the
other discrimination cursors are
extinguished.
c. Sweep the six samples about
7-10cm above the search coil.
d. When sweeping the silver coin, the
detector responds, indicating that
the detector has memorized the
silver coin.
e. When sweeping the other five
samples, the detector does not
respond. (see Fig.14, take the silver
coin as an example).
f. If you want to search other material metals, press the "MODE" button
again. The MEMORY cursor still lights up, and still shows the same as
the illustrion on the top. Then repeat the above operation.
g. To quit the MEMORY mode, press the MODE button, making the
detector return to the state of Fig.12.Then press the MODE button
again, to quit the MEMORY mode, and enter the next operation mode.