Waldbeck Azteca Manual De Instrucciones página 40

EN
9. Other modes
You can choose other operation mode according to your needs and
experience. If there are more scrap metals in the detection area, you can
choose the DISC mode to reject the metals that do not need to be detected.
Remind you once again, when detecting in the wild, due to the impact of the
ground condition, the discrimination indication and depth indication will be
all deviation. The composition, size and oxidation of the metals will all affect
the indication result.
It is necessary for you to consider these factors before choosing elimination
a certain metal or determining whether there are precious metals. Not to
eliminate the precious metals.
In fact, the sensitivity in the non-motion mode is high, search metals directly
using non-motion mode is also a choice. In some regions, the ground is too
narrow to sweep search coil, you could choose the PINPOINT mode. In the
severe mineralization or salinization region, you could try to sweep using
PINPOINT directly.
40