Chauvet DJ Intimidator Wave IRC Guía De Referencia Rápida página 6

Intimidator™ Wave IRC QRG
IRC-6 (Infrared
Remote Control)
DMX Linking
Starting Address
Master/Slave
Connection
All manuals and user guides at all-guides.com
The Intimidator™ Wave IRC is compatible with the IRC-6 from Chauvet.
The following IRC-6 buttons are used with the Intimidator™ Wave IRC:
·
<BLACKOUT>, <A>, <UV>, <W> - Turns LED on/off
·
<AUTO> , <0> thru <9> - Selects Auto program mode
·
<SOUND> - Selects Sound mode
·
<STROBE> - Strobing (0–20 Hz)
·
<SPEED> - Auto program speed
·
<SENSITIVITY> - Sets sound sensitivity
·
<%> - Dimmer
·
<MANUAL> - Sets white color level
·
<R> - Sets red color level
·
<G> - Sets green color level
·
<B> - Sets blue color level
The Intimidator™ Wave IRC works with a DMX controller. Information about
configuring the Intimidator™ Wave IRC for DMX operation is in the User
Manual, which is
http://www.chauvetlighting.com/product-manuals-literature/. Information about
DMX is in the Chauvet DMX Primer, which is available from the Chauvet
website:
http://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.
To ensure full access to all channels in each DMX mode, the highest recommended
DMX address for this product is 479.
The Intimidator™ Wave IRC works in Master/Slave mode. Information about
configuring this product for Master/Slave operation is in its User Manual, which is
available from the Chauvet website:
manuals-literature/.
available from
http://www.chauvetlighting.com/product-
6
EN
the Chauvet website: