Inateck BCST-73 Manual Del Usuario página 23

range, scanned data will not upload to comupter immediately. Instead, it will be kept
in the buffer of Inateck BCST-73. Quickly double press on the trigger can upload data
from buffer.
b. Under Inventory Mode , scanned data will be kept in the buffer of Inateck BCST-73. To
upload data to computer, please refer to the use of ʻData Upload ʼbarcode.
5. Some barcodes cannot be read, why?
a. Dirty or unclear barcodes might not be read.
b. It is possible that the setting is off by default for some barcode types which are not
commonly used. You need activate a specific barcode type to get it working. Please
feel free to contact our Customer Service Team for further assistance if you don't
know the exact type of barcode that you are referring to.
6. If the scanning data cannot be uploaded when the barcode scanner is under "Bluetooth
Mode" or "Wireless Adapter Mode", please try the steps below.
a. Restore to factory setting
b. Re-connect the scanner, please refer to the chapter " Connection Modes"
EN
21