Inateck BCST-71 Manual Del Usuario página 6

EN
d) A three-chord sound (from low to high) indicates a successful pairing. Once there is a
long high tone, it means the pairing fails and a repeated operation is needed.
To pair more scanners with the adapter, please operate as the steps mentioned above.
3) Pair one scanner with multiple USB adapters
a) Scan "Enter Setup" barcode
b) Scan the barcode "Pair one scanner with multiple USB adapters", and get the Inateck
BCST-71 as close as possible to the USB adapter (within 2 meters)
c) Insert the USB adapter into a computer. The indicator of the adapter flashes once along
with a long high tone, which indicates a successful pairing. Unplug the adapter and
then pair the next one with the BCST-71 barcode scanner. No operation is required on
the barcode scanner in this process.
d) If all the adapters have been paired with the BCST-71 barcode scanner, please short
press the trigger on the barcode scanner, and the pairing stops.
Note : The more USB adapters a BCST-71 barcode scanner is connected with, the longer
transmission time it takes. A BCST-71 barcode scanner can pair with 8 adapters at the most.
Bluetooth Mode(HID)
The Bluetooth mode (HID) is not a default mode. To switch to this mode, please scan the
setting barcodes in sequence " Enter to setup" - "Bluetooth Mode (HID) " - " Exit with Save"
4
Pair one scanner with multiple USB adapters