flir T8 Serie Manual De Instrucciones página 8

2 EN-US English
2.7.1 Disposal of electronic waste
Equipment marked with the below crossed-out wheeled bin is
electrical and electronic equipment. The crossed-out wheeled
bin symbol indicates that waste electrical and electronic
equipment should not be discarded together with unseparated
household waste, but must be collected separately.
2.8 Quick start guide
Follow this procedure:
1. Before starting the camera for the first time, charge the battery for 3 hours
using the stand-alone battery charger.
2. Put the battery into the camera battery compartment.
3. Insert a memory card into the card slot.
Note Empty or use a memory card that has not previously been used in an-
other type of camera. The cameras may organize files differently on the
memory card. There is therefore a risk of losing data if the same memory
card is used in different types of cameras.
4. Push the on/off button
5. Follow the instructions on the camera screen to configure your camera. You
can, for example, select the language, units, and date and time formats.
You can also set up the camera to upload images for storage online. To ena-
ble upload of images, you need to connect the camera to a Wi-Fi network
and pair the camera with a FLIR Ignite account. Use a computer or other de-
vice with internet access and follow the instructions on the camera screen.
Note You can do all the settings as a part of the initial setup of the camera
or later at any time via the Settings menu.
6. To enable automatic upload of images, select
Ignite, and set the Auto upload switch to On.
7. Aim the camera toward the object of interest.
8. Adjust the infrared camera focus.
Note It is very important to adjust the focus correctly. Incorrect focus ad-
justment affects how the image modes work. It also affects the temperature
measurement.
#T810412; r. AE/80342/80342; mul
to turn on the camera.
(Settings), sign in to FLIR
5