Publicidad
Idiomas disponibles
Idiomas disponibles
5.
microSD card port
6.
Microphone
How to start the camera and run the application
Find and download Lionelo Smart application from iOS Store/Google
Play store, or scan QR code at the beginning of the operating manual.
Note: Only Wi-Fi 2.4 GHz networks are supported. 5 GHz networks
are not supported.
1.
Sign up in the application through your e-mail address. Accept
the terms of use.
2.
Select the user name and password, and then click „Confirm".
Enter the code you have received in your mailbox.
3.
While configuring, set the camera as close to the Wi-Fi router as
possible to boost the pairing procedure (fig. 6).
Note: the camera can be added only to one account in the application.
To add the camera to other account, it must be deleted from the
previous account.
1.
Supply power to the camera through a USB cable.
2.
Select „Add new device".
3.
Reset the camera by pressing and holding the reset key for 5
seconds (3, fig. B).
4.
Select Wi-Fi network which you wish to connect to and enter
the password.
5.
You will see QR code in the application. Place the mobile phone
at a distance of about 20 cm from the camera (fig. 7). Wait for
the camera to give a sound. Configuration should be completed
within about 30 seconds.
Light indicator
1.
The light glows in red – no connection.
EN
‑ 8 ‑
Publicidad
