Device Functions; How To Install - Lionelo care Babyline SMART Manual De Usuario

2.
The light flashes in red – the camera awaits Wi-Fi connection.
3.
The light glows in blue – the camera works properly.
4.
The light flashes in blue – the camera awaits connection to the
application.

Device functions

1.
The application allows you to play melodies through the baby monitor.
2.
Videos and photographs are saved in the user's mobile phone, or on
the microSD card, if it has been inserted into the baby video monitor.
3.
The application allows a two-way audio communication with the child.
4.
Image rotation in the screen – turn the video vertically and
horizontally at any time.
5.
Motion and sound sensors will notify you in case of detection of
motion or sound in the room.
6.
Day/ Night - this function assures a night vision of up to 10 m.
7.
Full description of application functions is available on Lionelo
website.
Temperature and humidity sensor
Connect the temperature and humidity sensor to the longitudinal
tip of the camera (fig. 8). After starting the camera, temperature and
humidity in the room will be available in the application.
Reset key
Press and hold the reset key for 5 seconds to reset the camera and
restore the factory settings.

How to install

The longitudinal tip can be set in any way (fig. 1). To install the camera
on the wall, use the mounting bracket. The bracket can be attached to
‑ 9 ‑ EN