Descargar Imprimir esta página

Lionelo Bastiaan One Manual De Usuario página 12

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 78
16. During the travel, the safety seal must be properly attached to the
car's seat by means of the car safety belt or ISOFIX and Top Tether,
even when there is no child.
17. Do not use load bearing points of contact other than those described
in the instructions and marked on the child restraint
18. For rearward facing installation: do not install the child seat on
seats with airbags.
19. Install the rearward-facing seat if the child weighs less than 9 kg
20. If in doubt about the position of the adult seat belt buckle in relation
to major load-bearing contact points, contact the manufacturer.
CAUTION!
Never use the safety seat with 2-point seat belts (fig. 1).
fig. 2
Suitable position of the safety seat in the car
Not suitable position of the safety seat in the car
?1 Place the safety seat facing forward. Do not place the safety seat
on the passenger's front seat when the passenger's airbag is active
?2 Installation is possible only if three-point seat belts and ISOFIX
anchorages are present.
SAFETY SEAT OUTLINE (fig. 3)
1.
Belt guide
2.
Safety seat cover
3.
Arm pad
4.
Shoulder belt
5.
Buckle clasp
6.
Red button
7.
Buckle
8.
Crotch pad
9.
Reduction pad
10.
Belt tension adjustment button
11.
Tension adjustment belt
12.
Rotation button
EN
13.
Headrest height adjustment
14.
Headrest
15.
Red and blue belt guide
16.
Tilting handle
17.
Base
18.
ISOFIX overlays
19.
Buckle
20.
Upper fastening belt TOPTETHER
21.
ISOFIX button
22.
Belt adjustment
23.
ISOFIX arms
‑ 12 ‑

Publicidad

loading