Wall Mounting - Technoline WS 8118-IT Manual De Instrucciones

WALL MOUNTING

1) Using a straightedge, horizontally space at 60 mm three screw positions on a
wall.
2) Install three mounting screws (not included) into a wall within transmission
range—leaving approximately 5mm extended from the wall.
3) Place the Moonphase wall clock onto the screws, using the hanging holes on
the backside. Gently pull the Moonphase wall clock down to lock the screws
into place.
Note: Always ensure that the Moonphase wall clock locks onto the screws before releasing.
POSITIONING THE OUTDOOR TEMPERATURE TRANSMITTER
The remote temperature transmitter can be placed onto any flat surface or
wall mounted using the bracket which doubles as a stand or wall mount
base.
To wall mount:
1.
2.
Note:
The mounting surface can affect the transmission range. If, for instance,
the unit is attached to a piece of metal, it may then either reduce or
increase the transmitting range. For this reason, we recommend not to
place the unit on any metal surfaces or in any position where a large metal
or highly polished surface is in the immediate vicinity (garage doors,
double glazing, etc.). Before securing in place, please ensure that the
Secure the bracket onto a desired wall using the screws and plastic
anchors.
Clip the remote temperature transmitter onto the bracket.
EN11