Care And Maintenance - Technoline WS 8118-IT Manual De Instrucciones

Moonphrase Wall Clock can receive the 868MHz signal from the
temperature transmitter at the

CARE AND MAINTENANCE:


Extreme temperatures, vibrations and shocks should be avoided as these may cause
damage to the unit and give inaccurate forecasts and readings.

When cleaning the display and casings, use a soft damp cloth only. Do not use solvents or
scouring agents as they may mark the LCD and casings.

Do not submerge the units in water. Furthermore, fix all parts in place where the units are
adequately protected against moisture and rain.

Immediately remove all low powered batteries to avoid leakage and damage. Replace only
with new batteries of the recommended type.

Do not make any repair attempts to the unit. Return them to their original point of purchase
for repair by a qualified engineer. Opening and tampering with the unit may invalidate their
guarantee.

Do not expose the units to extreme and sudden temperature changes, this may lead to
rapid changes in forecasts and readings and thereby reduce their accuracy.
Hereby, Technotrade declares that this product WS 8118-IT is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU and ROHS 2011/65/EC. The
original EU declaration of conformity may be found at: www.technoline.de/doc/4029665081182
SPECIFICATIONS:
Temperature measuring range
Indoor
Outdoor
Temperature checking interval
Indoor
Outdoor
Transmission distance
Transmission frequency
positions that you wish to place them.
: -9.9ºC to +39.9ºC with 0.1ºC resolution
+14.1ºF to +103.8ºF with 0.2ºF resolution
("OF.L" displayed if outside this range)
: -39.9ºC to +59.9ºC with 0.1ºC resolution
-39.8ºF to +139.8ºF with 0.2ºF resolution
("OF.L" displayed if outside this range)
: every 20 seconds
: every 4 seconds
: maximum 100 meters in open field, depending upon
surrounding structures, mounting location and possible
interfering sources
: 868 MHz
EN12