WOOD'S MRD20GW Manual De Instrucciones página 5

Step 8: Connect to your Wi-Fi Network
and press next and follow the steps.
Step 10: You can now use your
application.
Step 9:The device is now added.
Press "Done".
Troubleshooting If the pairing process is not
successful:
Verify that the router is broadcasting at 2.4GHz.
If the router has dual-band broadcasting, verify that
the network names (SSIDs) are different.
For additional help, contact your router/internet provi-
der.
Verify that the WiFi password is WPA2-PSK en-cryp-
ted, and the authorization type is set to AES.
Position the dehumidifier as close as possible to the
router during the pairing process.
Power off the router, the dehumidifier, and the device
(tablet or mobile) and wait for 5 minutes.
Restart the pairing process from Step 2.
If the pairing is not successful, repeat the process
with a different smart device (tablet or mobile).
5