ACDelco ARG1213 Manual Información Del Producto página 9

Model Number
Collet Capacity
No Load Speed
Tool Weight
INSTALLING OR REMOVING BATTERY PACK
TO REMOVE BATTERY PACK: Depress the battery pack release button (4) and pull
the battery pack (5) out of tool.
TO INSTALL BATTERY PACK: Push the battery pack (5) onto tool until it locks in
place.
CHANGING THE COLLET
Some accessories require the use of different sized collets. Collet sizes are 1/8" (3.18
mm) & 1/4" (6.35 mm). It is important to ensure that the collet size matches the
accessory.
B
A
1/8"
1/4"
ARI1213
Using a collet that is too large for the accessory will result in the accessory possibly
being thrown from the tool causing serious injury.
1. Turn off the tool.
2. Loosen the collet nut (see above A) counter-clockwise by 17mm & 11mm
Spanners (refer to FIG. 2) until it is removed.
1English1
SPECIFICATIONS
Voltage
Type
2.42 lbs (1.10 kg)
ASSEMBLY
English
ARG1213
12 Vdc
Straight
1/8" & 1/4" (3.18 & 6.35 mm)
20,000 RPM
A
FIG. 1
-8
ARG1214
Right Angle
16,000 RPM
2.42 lbs (1.10 kg)
B
1/8"
1/4"
ARG1214