HOMCOM CALGARY 23G Manual De Montaje E Instrucciones página 8

WEEKLY TIMER SETTING OPERATION
1.Press Weekly timer Button to start weekly timer setting, and the display will show "0".
Note: Other number means the weekly timer has been set.
2.Press Weekly timer Button a second time until the back digits start flashing, the display shows "1 d" that means the the weekly
timer start from today.
1 d = First day (Today)
2 d = Second day (Tomorrow)
3 d = Third day
4 d = Fourth day
5 d = Fifth day
6 d = Sixth day
7 d = Seventh day
3.Press Weekly timer Button a third time to set the start working hours. Using the [+] and [-] to adjust.（0~23）
4.Press Weekly timer Button a fourth time to set power-off working hours. Using the [+] and [-] to adjust.（0~23）
5.Press Weekly timer Button a fifth time to set temperature. Using the [+] and [-] to adjust.（17~27 or on/off）
6.Press Weekly timer Button a sixth time for next day, the display will show "2 d", the operation method is same as above.
7.Repeat the above operation for each day!
If no press around 5 seconds during the time setting, it will automatically exit the 7-day weekly timer setting.
OPEN WINDOW FUNCTION (ADDITIONAL HIDDEN FUNCTIONS)
In the thermostat control heating mode, when the ambient temperature drops over 3 °C in 30 minutes, the display shows "00" and
flashes, this means there is window open or there may exist some cooling items opened, at the same time the temperature control
turns the heating off. You will need to turn the appliance off to stop the flashes.
UK-7