Axion STIM-PRO X700 Manual De Instrucciones página 46

The device must be subjected to safety checks and
maintenance by authorized technicians before use and
each re-use, but at least every 24 months.
Please consult your distributor if there are any problems
with the device and accessories.
The manual must always be carried with the device.
MALFUNCTIONS
Should any malfunctions occur while using your device, check
the following points. If none of these can solve the problem,
please contact the customer service.
Check if the controls are correctly adjusted. Check if the
values suggested by the physician have been adjusted.
Check if the cables are correctly connected to the device.
The display does not turn on? Replace the batteries.
Check the cables for possible damage. The device may only
be used when subjected to a load.
There is no stimulation current? Check if the electrodes are
correctly connected to the same channel and if the intensity is
high enough.
CONFORMITY TO SAFETY STANDARDS
The STIM-PRO X700 device is in compliance with the safety
standards EN60601-1:2006/A1:2013 Medical electrical
equipment - Part 1: General requirements for basic safety and
essential performance & EN60601-1-2:2015 Medical electrical
equipment - Part 1-2: General requirements for basic safety and
essential performance – Collateral Standard: Electromagnetic
disturbances - Requirements and tests
STIM-PRO X700
EN
45