Let's Get Started; Window Mounting - TCL H15W25W-CA Manual

Tip! Before unboxing, cut the tape
along the top of the box to loosen
contents inside. Once you lift and
remove the box, check the inside of
the box as some parts may be stuck
at the top. You can find the screws
and other parts located in the tray
beneath the AC uni

Let's Get Started!

Step 1:
Testing
Before installing your AC, let's test it to make sure it works properly and your outlet has the proper
power level. First, place it on a flat surface, plug it directly into a wall outlet (never use a power
strip or other device), and turn it on. Next, put the mode to cool and change the temperature
setting to the max cool setting. After 3 minutes, the AC should be blowing cool air. If so, please
continue on to the next step. If not, see detailed troubleshooting tips at support.tcl.com/us.
Step 2:
Installation
A few quick notes before installing:
• This unit is made to fit inside a standard double-hung window.
• Check the size of your window before installing.

WINDOW MOUNTING

1. Pull down the front panel and lift upwards. Place to the side.
2. Remove the filter.
t.
3
Front panel
6
Remove filter
1
2