Explanation Of General View - Makita TD021D Manual De Instrucciones

ENGLISH
(Original instructions)
1 Button
2 Battery cartridge
3 Lock lever
4 Switch
5 Light
SPECIFICATIONS
Model
Capacities
No load speed (min
Impacts per minute
Overall length
Net weight
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest
combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of resi-
dence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges and
chargers may cause injury and/or fire.
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
General Power Tool Safety Warnings
WARNING Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
4

Explanation of general view

6 Bit
7 Sleeve
8 Bit-piece
9 Straight type
10 Pistol type
Machine screw
Standard bolt
High tensile bolt
Coarse thread
–1
)
Straight type
Pistol type
22 mm – 45 mm
BL7010 / BL0715
DC10WA / DC10WB
CORDLESS IMPACT DRIVER SAFETY
WARNINGS
GEA010-2
1. Hold the power tool by insulated gripping sur-
faces, when performing an operation where the
fastener may contact hidden wiring. Fasteners
contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the oper-
ator an electric shock.
2. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
3. Hold the tool firmly.
4. Wear ear protectors.
5. Do not touch the bit or the workpiece immedi-
ately after operation. They may be extremely hot
and could burn your skin.
6. Keep hands away from rotating parts.
7. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
11 Standard bolt
12 Fastening torque
13 Fastening time
14 Proper fastening torque
15 High tensile bolt
TD021D
3 mm – 8 mm
3 mm – 8 mm
3 mm – 6 mm
0 – 2,300
0 – 3,000
282 mm
227 mm
0.54 – 0.55 kg
D.C. 7.2 V
GEB137-1