Sensorfilter And Sensor Replacement; Accessories; Customer Service; Disposal - Rothenberger ROTEST Electronic 3 Instrucciones De Uso

3.4

Sensorfilter and Sensor Replacement

The sensor is housed at the tip of the gooseneck assembly.
To remove the sensor:
Turn the unit off.
Pull off the top half of the sensor housing. Pushing to one side aids removal.
With care move the 'Tip-light' LED to one side to gain access to the sensor (small silver
can).
Unplug the sensor and replace it with a new one.
Note: The sensor can be fitted in either one of two ways without affecting instrument operation.
Realign the LED ensuring it sits above the sensor
Replace sensor cover by pushing it firmly in place. Note! The locating pin between the body
and sensor cap.
Close all valves and fold down hand pump.
4

Accessories

Accessory Name
ROTEST Electronic 3 basic unit
Plastic case for ROTEST Electronic 3
5

Customer service

The ROTHENBERGER service locations are available to help you (see listing in catalog or on-
line) and replacement parts and service are also available through these same service locations.
Order your accessories and spare parts from your specialist retailer or using RoService+ online:
Phone: + 49 (0) 61 95 / 800 – 8200
Fax: + 49 (0) 61 95 / 800 – 7491
Email: service@rothenberger.com
www.rothenberger.com
6

Disposal

Components of the unit are recyclable material and should be put to recycling. For this purpose
registered and certified recycling companies are available. For an environmental friendly dispos-
al of the non-recyclable parts (e.g. electronic waste) please contact your local waste disposal
authority.
For EU countries only:
Do not dispose electric tools with domestic waste. In accordance with the European
Directive 2012/19/EU the disposal of electrical and electronic equipment and its im-
plementation as national law, electric tools that are no longer serviceable must be
collected separately and utilised for environmentally compatible recycling.
ROTHENBERGER Part Number
66081
66085
ENGLISH 9