Safety; Risk Of Electric Shock - Steinbach Premium 100 Manual Original

Products marked with this symbol meet all the applicable Community
regulations of the European Economic Area.
Never use a sharp knife or other pointed object to open the packaging.
You may damage the contents.

Safety

The following signal words are used in these operating instructions.
WARNING!
CAUTION!
NOTICE!
General safety instructions
Faulty electric installation or excess mains voltage can cause an
electric shock.
- Only connect the power cable if the mains voltage of the socket
matches that on the type plate.
- Only connect the power cable to an easily accessible socket so
that you can quickly disconnect it in the case of a fault.
- Only operate the device on a grounded socket secured with at
least 16A.
- The device must be powered via a residual current device with a
rated residual current of at most 30 mA.
- Do not operate the device if it shows visible damage or if the
power cable is defective.
42
This signal symbol/word denotes a hazard with an
average risk level that could lead to death or severe
injury if it is not avoided.
This signal symbol/word denotes a hazard with a low
risk level that could lead to mild or moderate injury if
it is not avoided.
This signal word provides a warning about potential
material damage.
WARNING!

Risk of electric shock!