YESOUL V1 Manual De Producto página 6

Installation Guide
STEP 2: Install ground pipes
1.Install the front ground pipe assembly ①, and tighten it with the hex key (B), as shown in the figure.
2.Lock it with two sets of hexagon socket button head screw ③ and flat washer ⑤ as shown in the
figure, make sure to lock the pipe tightly; otherwise, it may result in deformation.
3.Check and confirm the adjusting footpad is fully locked into the front ground pipe assembly .
1.Install the rear ground pipe assembly ②, and tighten it with the hex key (B), as shown in the figure.
2.Lock it with two sets of hexagon socket button head screw ③ and flat washer ⑤ as shown in the
figure, make sure to lock the pipe tightly; otherwise, it may result in deformation.
3.Check and confirm the adjusting footpad is fully locked into the rear ground pipe assembly .
③
⑤
①
③
⑤
②