Cleaning Tips - HTW CAL2000SLIM Manual De Usuario

1. Set the speed control to position "0" (stop).
2. Unplug the power cable and check that all air inlets and outlets are free.
3. Wait for the heater to cool down, for a period of not less than 10 minutes.
4. Reconnect the power cable to the plug.
5. Set the speed control to heat position "1", check that the heater is working
properly.
This heater has several functions:
1. For the summer function (ventilation only): turn the knob to position
2. For the reduced heat function: turn the knob to position I (1000W).
3. For the maximum heat function: turn the knob to position II (2000W).
4. Stop: set the knob to position 0.

CLEANING TIPS

1. Disconnect the radiator from the main power supply before cleaning.
2. Wipe the outside of the radiator with a damp cloth and dry it with a chamois.
3. Do not use waxes or polishes as they may react with the heater and cause
discolouration.
4. Never immerse the heater in water or any other liquid.
5. A hoover or brush may be used for cleaning.
STORAGE
1. Keep the box for off-season storage.
2. Clean the heater according to the cleaning instructions above.
3. Place the radiator and wheel assembly in the original box, and store in a cool, dry
place.
2