Publicidad
Idiomas disponibles
Idiomas disponibles
environment. If water penetrates into the device, there is an increased risk of
damage to the device and electric shock.
c)
Do not touch the device with wet or damp hands.
d)
Do not use the cable in a wrong way. Never use it to carry the device or to pull
the plug out of the socket. Keep the cable away from heat sources, oil, sharp
edges or moving parts. Damaged or tangled cables increase the risk of electric
shock.
e)
If you cannot avoid using the device in a wet environment, use a residual
current device (RCD). Using an RCD reduces the risk of electric shock.
f)
Do not use the device if the power cable is damaged or shows clear signs of
wear. A damaged power cable should be replaced by a qualified electrician or
the manufacturer's service.
g)
To avoid electric shock, do not immerse the cable, plug or device itself in water
or other liquid. Do not use the device on wet surfaces.
h)
CAUTION – DANGER TO LIFE! When cleaning or using the device, never
immerse it in water or other liquids.
i)
The device must not get wet. Risk of electric shock!
2.2. Safety in the work area
a)
Keep the work area tidy and well lit. Disorder or poor lighting can lead to
accidents. Be careful, watch what you are doing and use common sense when
working with the device.
b)
If in doubt as to whether the product is working properly or if you detect
damage, contact the manufacturer's service.
c)
Repairs of the product may only be carried out by the manufacturer's service.
Do not carry out repairs yourself!
d)
In the event of fire or fire, use only powder or snow (CO2) extinguishers to
extinguish fire in the device where there is voltage.
e)
Keep these instructions for future reference. If the device is to be passed on to
third parties, the instructions for use must be handed over together with the
device.
f)
Keep packaging parts and small assembly parts out of the reach of children.
Remember! Keep children and other bystanders safe while operating the
device.
2.3. Personal safety
Publicidad
