SPORTSTECH WRX1000 Manual De Instrucciones página 54

FUNCTION DATA DISPLAY DESCRIPTION
Display Display Range Setting Range Memory Zeroing
Item
1 TIME 0:00~99:59
2 SPM 0~15~999
3 WATT
4 DISTANCE 0.00~99.99 KM
5 CALORIES 0~9999 CAL
6 PULSE P, 30~220
HEART
7 ON/OFF sparkling
SYMBOL
8 COUNT
9 /500 m
FUNCTION DESCRIPTION
1. Heartrate recovery
Press " " key to start the heartrate recovery function. The test time is counted down from 1 minute
to 0:00; the heartbeat symbol will continue to flash until 0 is reached. During the testing time, ensure
proper contanct with the pulse sensor so that the heartbeat symbol keeps flashing. After the test, the
display evaluates the user's heartrate recovery from F1 through F6.
Pulse Recovery
F1
F2
F3
F4
F5
F6
2. Bluetooth heart rate function
Before exercising, the user turns on the Bluetooth heartrate sensor. When it is properly worn, the
measured data will be displayed;
0:00~99:00
±1
No
0~999 No
No
No
0-->30~220
No
0~9999 No
No
User Pulse Recovery Status
Perfect
Normal
Passable
Need more exercise
Lack of exercise
Yes Yes
No Yes
No Yes
Yes Yes
Yes Yes
Yes Yes
No No
No No
No No
Good
54
Description
When the time countdown
is 0, there will be a prompt
tone and return to the
standby interface.
- Signal sensor, values are
displayed after 3 seconds;
- When no signal is availa-
ble, Zero is displayed after
4 seconds.
- Signal sensor, values are
displayed after 3 seconds;
- When no signal is availa-
ble, Zero is displayed after
4 seconds.
Distance covered
Calories burned
- Blinking when heart rate
signal is received;
- No display when no heart
rate signal is received.
Number of rowing strokes
The time taken for 500 m
Pulse Difference
(Before and After Test)
Average 50
40-49
30-39
20-29
10-19
10 Below