Publicidad
Idiomas disponibles
Idiomas disponibles
10
POLYMER LED DISPLAY
Polymer LED Display allows you to choose the
display mode you personally prefer. There are two display
modes to choose from: a numeric or block(s) display.
1
To select your personal display press the ON/OFF button
for about 3 seconds.The numeric display will appear
along with the replacement head symbol, cleaning, and
plug indicators.
2
If you prefer the block display, continuously press and
release the ON/OFF button until you visibly see the
display you desire. You will hear a beep to confirm your
personal choice. Changing your display selection is
always possible.
NOTE: For first time use of the razor, or after non-use for
one month, you may need to press for several minutes before
the display appears!
The display provides the following information:
When you turn the razor ON or OFF the display will
come on for approximately 10 seconds.
Charging Indicator
The numeric display: As soon as you connect the
charging plug to an electrical outlet, the display goes on. The
"O" appears as well as the plug symbol and the minutes left
indicator words. The spark symbol will start blinking. This
display shows an increase in shaving minutes from 0 to 100.
The block(s) display: As soon as you connect the
charging plug to an electrical outlet, the display goes on.
The min./max. indication appears as well as the plug symbol.
The spark symbol starts blinking. The display shows an
increase in blocks (from red block to max).
Publicidad
