Bimar VPM411 Folleto De Instrucciones página 11

• In the event of a breakdown or poor operation, turn the fan heater off
and ask for professionally qualified help: repairs made by unqualified
persons can be dangerous and render void the warranty.
• Ensure that the fan is switched off from the supply mains before
removing the guard.
INSTALLATION
• After removing the packing materials, check the integrity of the appliance; if you are unsure,
do not use it and ask for qualified professional help. The packing materials (plastic bags,
polystyrene foam, nails, etc.) must be kept out the reach of children because they are
potential sources of danger. Attention: any stickers or advertising material applied to the grid
removed before using the appliance. The manufacturer declines all responsibility in case this
is not safe working practices will be respected.
• Before connecting the appliance, check that the voltage shown on the data plate matches
that of your electricity, and that the electric plug is grounded. In the event of incompatibility
between the electric outlet and the plug of the appliance, have the outlet replaced with
another more suitable type by professionally qualified personnel, who will make sure that the
section of the wires of the outlet is appropriate for the absorbed power of the heater. In
general, the use of adapters or extension cords is not recommended; if their use is
indispensable, they must conform to existing safety standards and their current capacity
(amperes) must not be less that the maximum of the appliance.
• The power socket must be easy to reach so the plug can be removed quickly in case of
emergency.
• To not place the appliance near sinks or other container of liquids (minimum distance of 2
meters) to avoid the risk of it falling in.
• Do not place the appliance near an open flame, cooking or other heating appliance.
• Keep the fan far away from fabrics (curtains, etc.) or unstable materials that could obstruct
the air intake grille; make sure that the front is free of unstable materials (dust, etc.).
• Make sure that the electric cord is not touching rough, hot or moving surfaces and not
twisted or wrapped around the appliance.
• Stand the appliance on a horizontal, flat surface; do not stand on a inclined plane (the
appliance could upset).
ASSEMBLY
Attention: the fan can be used only when completely and correctly assembled, that is complete
with its base and support and protection grid. If in doubt, have the appliance checked or
assembled by a qualified professional person
Attention: always unplug the appliance before you assemble.
For assembly, refer to figure.