Atlantic ECOBLOX Manual Del Producto página 3

Assembly
1. Begin assembly by placing one panel 74269 on the ground. When assembly is complete
this panel will become the bottom of the Eco-Blox.
2. For Eco-Blox, align the short side of one of the four support panels 74270 with one of the
four receiving channels of the panel 74269. For Eco-Blox Small, align the long side of one
of the four panels 89664 with one of the four receiving channels of the panel 74269.
Insert the slide lock tabs into the channel and slide until the panel is snug. Line up the
next three panels in the same way. Do not worry about perfect alignment of the panels;
the panels will be aligned last.
3. Take another panel 74269 for the Eco-Blox or panel 89666 for Eco-Blox Small and line up
the channels with the tabs on the four small panels. Push in to engage the tabs then
slide the panel down until it makes contact with the bottom panel.
4. Repeat for the other side panel 74269 for the Eco-Blox or panel 89666 for Eco-Blox
Small. Be sure all tabs are properly inserted into their respective channels. Verify the side
panels are even with the tops of the four small panels.
3