Publicidad
Idiomas disponibles
Idiomas disponibles
7. Operation
Easys opens drawers and pull-outs automatically by pressing or
pulling on the front panel.
• To activate Easys, give the pull-out's front panel a short press
or
• give the pull-out handle a short pull
NOTE
Do not obstruct the drawer or pull-out once Easys has been
activated.
Do not increase the opening force by holding it back.
Avoid improper use to prevent premature system wear.
7.1 Actions in case of emergency
An emergency action has the purpose of disconnecting Easys
system components from the power supply in hazardous situati-
ons.
NOTE
The power sockets or fuses required for using the Easys system
in the intended manner must be easily accessible. The use of
permanently installed and switched sockets is recommended and
may be necessary.
Hettich Marketing- und Vertriebs GmbH & Co. KG · Vahrenkampstraße 12 -16 · 32278 Kirchlengern · Telefon + 49 52 23/77-0 · www.hettich.com
74
Hettich Marketing- und Vertriebs GmbH & Co. KG · Gerhard-Lüking-Straße 10 · 32602 Vlotho · Telefon +49 5733 798-0 · www.hettich.com
8. Troubleshooting
The Easys system must only be repaired or serviced by the retai-
ler's or manufacturer's skilled personnel or by a person who has
received instruction.
Immediately notify the retailer or the manufacturer's Customer
Service Department of any damage occurring during the warranty
period!
!
DANGER
Working on live components in the improper manner
presents a danger to life!
Work on the electrics or electrical installation must
only be carried out by a qualified electrician.
When working on the electrics, disconnect the Easys
system from the mains power supply by unplugging it
from the mains power socket.
NOTE
!
Publicidad
