Use Of The Microscope; Switching The Microscope; Light Intensity Adjustment; Stage - Optika Italy B-60 Serie Manual De Instrucciones

8.

Use of the microscope

8.1

Switching the microscope

1. Operate on the light intensity adjustment dial ①
to turn ON / OFF the microscope. (Fig. 6)
8.2

Light intensity adjustment

1. Operate on the light intensity adjustment dial ①
to increase / decrease the illumination voltage.
(Fig. 3)
8.3

Stage

B-61
1. Raise the fixing clips and place the slide on the
stage.
2. Lower the clips to hold the slide and prevent ac-
cidental falling. (Fig. 7)
B-62 / B-63 / B-65 / B-66 / B-67 / B-69
Stage accepts standard slides 26 x 76 mm, thickness
1,2 mm with coverslide 0,17 mm. (Fig. 8)
1. Open the spring arm of the slide holder ② and
place the slide from the front on the stage.
2. Gently release the spring arm of the slide holder.
• A sudden release of the spring arm could
cause the falling of the slide.
8.4

Adjust the interpupillary distance

B-66 / B-67 / B-69
1. Hold the right and left parts of the observation
head using both hands and adjust the interpupil-
lary distance by turning the two parts until one
circle of light can be seen. (Fig. 9)
• The graduation on the interpupillary distance in-
dicator ③, pointed by the spot "." on the eyepiece
holder, shows the distance between the opera-
tor's eyes.
The range of the interpupillary distance is 55-75 mm.
①
③
Page 10
F ig. 6 F
F ig. 7 F
②
F ig. 8 F
F ig. 9 F
ig. 6
ig. 7
ig. 8
ig. 9