Publicidad
Idiomas disponibles
Idiomas disponibles
Whilst heating, one press on (
) Button stops the oven. You can
restart it by pressing the (
) Button or a second press on (
will cancel the selected program. When it is NOT in a heating cycle,
one tap on (
) Button cancels the selected program. You can set the
power level first and then the cooking time next, or vice versa. You can
press +20s button one or more times in order to add the cooking time
by 20 seconds.
When heating cycle is completed and you open the door, the oven lamp
automatically turns on and goes off 1 min later.
When you open the door whilst in a heating cycle, the oven stops
operating and the oven lamp automatically turns on for 5 min and goes
off 5 min later. If you leave the oven door open for more than 5 min, the
oven beeps once every minute.
When in a heating cycle, you can not change the power level or heating
time. But you can add 20 sec increments using the +20s Button. The
dial may be rotated but this does not affect the current operation and
the display remains the same. It becomes effective next time you set the
oven manually after you finish the current heating. If
you want to change the current setting, firstly stop the heating by using
CANCEL Button and set desired power level and cooking time again.
But when you are NOT in a heating cycle, you can change the power
level and heating time. Changed values are promptly shown in the
display.
The oven is designed not to work when power level is set to "0" mode
between the heating mode and the defrosting mode.
When you first plug in the power cord, the oven beeps once and all the
indicators show for 5 sec in the display window.
POWER LEVELS AND TIME VARIATIONS
) Button
The power level function enables you to adapt the amount of energy
dissipated and thus the time required to cook or reheat your food,
according to its type and quantity. You can choose between the power
levels below.
Power level
HIGH (
)
MEDIUM (
)
LOW (
)
HIGH DEFROST (
)
LOW DEFROST (
)
The cooking times given in recipes and in this booklet correspond to
the specific power level indicated.
Power level
HIGH (
)
MEDIUM (
)
LOW (
)
HIGH DEFROST (
LOW DEFROST (
)
The maximum time available per power level is shown in the table
above.
A defrosting time can be set up to 50 min. But the time is reduced to 25
min (for HIGH) or 40 min (for MEDIUM or LOW) the moment you change the
current power level (DEFROST) to other level such as HIGH, MEDIUM or
LOW.
Example : If you set a defrosting time to 45min with the heating mode
at DEFROST and if you change the power level to HIGH, the time will be
automatically reduced to 25min.
You can set the power level first and the cooking time next, and vice versa.
9
MJ26A6091
Percentage
Output
Percentage
100 %
1850 W
100 %
70 %
1295 W
70 %
50 %
925 W
50 %
20 %
370 W
25 %
10 %
185 W
13 %
Max. Time
25 mins
40 mins
40 mins
)
50 mins
50 mins
MJ26A6051
Output
1500 W
1050 W
750 W
375 W
195 W
Publicidad
