Publicidad
Idiomas disponibles
Idiomas disponibles
9 USE OF PRODUCT
9.1 3 Spd Touch Button
Fig. 13: Touch Button
1. Press this button to turn on the product.
When this button is pressed, product will also
operate at speed level 1 (Fig.13).
2. When this button is pressed, product will op-
erate at speed level 2 (Fig.13).
3. Dgt Display: You can see the operation rate
of product on this screen (Fig.13).
4. When this button is pressed, product will op-
erate at speed level 3 (Fig.13).
5. Press this button to turn on or off the lamp
(Fig.13).
To activate timer function, press and hold any of
buttons 1, 2 and 3 for 3 seconds. Then, 15 min-
ute timer function will be activated and the prod-
uct will turn off automatically after 15 minutes.
All active functions operated prior to activation
of timer function will be deactivated after 15
minutes. All active functions operated after acti-
vation of timer function will be reactivated after
15 minutes.
9.2 Push Button
Fig. 14: Push Button
1. Press this button to turn on or off the lamp.
2. When this button is pressed, product will
operate at speed level 1.
3. When this button is pressed, product will
operate at speed level 2.
4. When this button is pressed, product will
operate at speed level 3.
5. Press this button to reset the product.
Cleaning Periods of the Metal Filter:
The filters must be cleaned when "C" signal ap-
pears on the display or (depending on usage)
after every 2-3
weeks. When the filters are cleaned and mount-
ed in their places, press button ( ) for more than
3 seconds in order to delete "C" signal (when
the product is inactive). Letter "E" will appear
on the display, and the product will switch to
normal operation. If you would like to resume
operation without deleting "C"
signal, current speed shall be displayed for 1
second when you press ( ) button,
and motor shall resume operation with the "C"
signal appearing.
"C" mark will appear at the end of the product's
usage period of 60 hours.
21
Publicidad
