Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE
Programmable functions can be set when the
motor and lamp are turned off and timer isn't
set.
Back light brightness settings
When you press - button for approx. 5 seconds,
percentage of blue colour is displayed. (for ex:
B 00) Red colour percentage will appear on the
screen if - button is pressed one more time. (for
ex. R 100)
Green colour percentage may be displayed on
the screen by pressing . button one more time.
(for ex: G 10) By pressing on the colour and
buttons percentage of which is shown on the
screen (can be set faster by pressing longer),
percentage can be set between 0 and 100.
New colour is saved (a beep sound is heard)
by pressing and holding - button for 5 seconds,
and setting mode is turned off. To exit the set-
ting mode without saving, Mot/off or lamp but-
tons can be pressed.
Back light option
Back light is set to be constantly on when
shipped from the factory. If desired, back light
can be set to off when motor and lamp are
turned off and timer is not set (i.e. when the
cooker hood is not in use) by pressing and
holding + button for about 5 seconds (a beep
sound is heard). In order to set the back light
back to constantly on again, + button is pressed
for about 5 seconds.
Boost Ventilation Mode:
The model you have purchased has a boost
mode for energy efficiency.
Boost Mode: When the product is switched
to maximum speed while it is operated, a 'b'
symbol shall be displayed on the screen.
Boost symbol indicates that (boost ventilation)
mode is active on the model. Product shall
operate for 7 minutes in this mode and 'b'
symbol shall flash on the screen during
this period. After 7 minutes, product shall
automatically switch down one speed level
and shall resume operation in the lower speed
level.
Note: It is not possible to use timer feature in
the boost mode.
LCD Screen Colour Values
24
Publicidad
