Connect The Base Unit - Amplicomms PowerTel 1780 Manual De Instrucciones

Connect the base unit

1. Plug the connector on the cable end into the corresponding
jack on the underside of the base and plug the power
adaptor into the wall socket.
2. Plug the small connector on the end of the telephone line
cord into the corresponding jack on the base and plug the
other end into the telephone jack.
Note: Guide the connection cables through the strain-relief tabs
on the base so the unit sits flush with the desk.
Helpline 0844 800 6503 (See page 35 for costs and hours of operation)
5