Cleaning And Maintenance; Technical Specifications; Disposal - AEG SR 4348 BT Instrucciones De Servicio

NOTE:
• This appliance does not support AVRCP (Audio Video
Remote Control Profile)!

Cleaning and maintenance

To clean the device, please proceed as follows:
• Separate the device from the mains.
• Wipe the outer surfaces of the device with a dry towel
without any cleaning additives.
Troubleshooting
Symptoms Cause
CD can not be CD has not been
played back. inserted correctly.
Batteries too weak. Insert new batter-
CD skips during CD is dirty.
the playback.
Device cannot be Device crashes and
operated. "hangs".
No audio signal Device not paired
during Bluetooth correctly.
playback.
Device out of
range.
A cable is con-
nected to the AUX
jack (5).
No playback from USB stick not
the USB stick. compatible.
Bad radio recep- Unfavorable recep-
tion. tion position.
NOTE: Automatic Standby switch
In order to comply with the "ErP 2 (Energy-related
Products)" Ecodesign Directive (2009/125/EC) that aims
at animproved energy efficiency and general environmen-
tal compatibility, the device will automatically switch to
standby after a certain amount of time without a signal. To
use the device again press the

Technical Specifications

Model: ............................................................................. SR 4348 BT
Power supply: ......................................... AC 110-240 V~ 50/60 Hz
Power Consumption:................................................................10 W
Protection class: ................................................................................II
Solution
Net weight: .............................................................................1.44 kg
Ensure that the CD
Frequency range: ...............................VHF/FM 87.5 ~ 108.0 MHz
has been inserted
Bluetooth
correctly.
Bluetooth support: ........................................................V2.0 + EDR
Range: ..................................................................approx. 15 metres
ies or operate the
Transmission frequency: ......................................................2.4 GHz
device with the
Protocols: .................................................................................. A2DP
mains lead.
The right to make technical and design modifications in
Clean the CD with
the course of continuous product development remains
a soft, dry towel.
reserved.
Disconnect the
power supply for This device has been tested according to all relevant current
5 sec. Then switch CE guidelines, such as electromagnetic compatibility and low
the device on
voltage directives, and has been constructed in accordance
again.
with the latest safety regulations
Perform the pairing
one more time.
Reduce the range.
Disconnect the
cable from the

Disposal

AUX jack.
Replace the USB
Meaning of the "Wheelie Bin" Symbol
stick with a differ-
Take care of our environment, do not dispose of electrical
ent one.
applicances via the household waste.
Change the direc-
tion of the antenna
Dispose of obsolete or defective electrical appliances via
or reposition the
municipal collection points.
device.
Please help to avoid potential environmental and health
Switch to MONO
impacts through improper waste disposal.
operation.
You contribute to recycling and other forms of utilization of
old electric and electronic appliances.
Your municipality provides you with information about col-
lecting points.
English
27
button (13).