Grounding Instructions - Easy Home EPA080BAUW Manual Del Usuario

Safety
Important safety information
Read and follow all safety instructions

Grounding instructions

Improper connection of the equipment-grounding
conductor can result in a risk of electrical shock.
Check with a qualified electrician or serviceperson
if you are in doubt as to whether your appliance
outlets are properly grounded.
• This appliance must be grounded. In the event
of malfunction or breakdown, grounding will
reduce the risk of electrical shock by providing
a path of least resistance for electrical current.
This appliance is equipped with a cord that
has an equipment-grounding conductor and
3 prong grounding plug. The plug must be con-
nected into an outlet that is properly installed
and grounded in accordance with all local
codes and ordinances.
• Do not modify the plug provided with this ap-
pliance. If it will not fit the outlet, have a proper
outlet installed by a qualified electrician.
• If the household electrical supply does not
meet the above specifications, or if you are not
sure your home has an effective ground, have
a qualified electrician or your local electrical
utility company check it and correct any prob-
lems.
SAVE THESE INSTRUCTIONS
4
Important safety information
Read and follow all safety instructions
Safety precautions
When using this air conditioner, always follow ba-
sic safety precautions, including the following:
• Use this appliance only for its intended pur-
pose as described in this Owner's Manual.
• This appliance must be properly installed and
grounded as described in this manual before it
is used.
• Never operate this appliance in an area that
could collect stagnant water. If this condition
occurs, for your safety, disconnect the power
supply before stepping on the water.
• Never unplug your air conditioner by pulling on
the power cord. Always grip the plug firmly and
pull straight out from the receptacle.
• Replace immediately all electric service cords
that have become frayed or otherwise dam-
aged. A damaged power supply cord must be
replaced with a new power supply cord ob-
tained from the manufacturer and not repaired.
Do not use a cord that shows cracks or abra-
sion damage along its length or at either the
plug or connector end.
SAVE THESE INSTRUCTIONS
Safety
5