Publicidad
Idiomas disponibles
Idiomas disponibles
MB-5401360_Bediene.qxd
4 Power tool use and care
a Do not force the power tool. Use
the correct power tool for your
application. The correct power tool
will do the job better and safer at the
rate for which it was designed.
b Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be
controlled with the switch is
dangerous and must be repaired.
c Disconnect the plug from the
power source before making any
adjustments, changing accessories,
or storing power tools. Such
preventive safety measures reduce
the risk of starting the power tool
accidentally.
d Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to
operate the power tool. Power tools
are dangerous in the hands of
untrained users.
e Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
f Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
g Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
58
16.11.2009 16:02 Uhr
All manuals and user guides at all-guides.com
Seite 58
account the working conditions and
the work to be performed. Use of
the power tool for operations different
from those intended could result in a
hazardous situation.
5 Use and treatment of the battery-
operated tool
a Only use chargers to recharge
the battery that have been
recommended by the manufacturer.
When using a charger designated for
a particular type of battery, there is a
risk of fire if it is used with other
batteries.
b Only use the batteries designed for
use in the electric tools. The use of
other batteries may lead to injury and
risk of fire.
c When not in use, keep the battery
away from paper clips, coins, keys,
nails, screws or other small metallic
objects that may bridge the contacts.
A short-circuit between the battery
contacts can lead to burns or fire.
d Fluid can escape from the battery
when used incorrectly. Avoid all
contact with this. In the event of
accidental contact, rinse with water. If
liquid should get into the eyes, get
medical assistance. Battery fluid may
result in skin irritations and burns.
6 General safety information for
battery-powered screwdrivers
Service
a Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This
will ensure that the safety of the
power tool is maintained.
Publicidad
