How To Use - Lionelo care Babyline 8.2 Manual De Usuario

How to use

Put the camera in a desired place (e.g. on the table or shelf) and point the
lens at the area you want to monitor (fig. 1).
NOTE! Do not place the camera within child's reach.
In case of any sound or image interference, reposition the camera and make
sure there are no other electric devices nearby.
How to switch the camera on
1.
Connect the USB power cable to the camera (fig. 2) and adapter (fig. 3),
and then plug the camera in.
2.
The camera will activate automatically after you have supplied it with
power. The camera LED light will turn green.
EN
Signal strength
Room temperature
Battery status
Temperature alarm active
Baby feeding reminder active
Sound alarm active
Camera not paired/camera unplugged
Temperature alarm
Baby feeding reminder
Low battery
Sound volume – five LEDs flash in green
Charging – the first LED on the right glows in red
‑ 10 ‑