Lionelo care Babyline 8.2 Manual De Usuario página 11

How to charge the display unit
1.
If it is necessary to charge the device, connect the USB power cable to
the display unit (fig. 4) and adapter, and then connect the display unit
to the source of power.
2.
Full charging takes about 3,5 hours. The battery level icon on the display
will stop flashing.
How to switch the display unit on
1.
Switch the display unit on by pressing the on/off key (9, fig. C).
2.
The display unit has been paired with the camera in the factory. If there
is no image on the display unit despite connecting the camera to the
source of power, please retake the pairing procedure as described in the
subchapter – How to add and delete the camera.
3.
To gain access to the menu, press the menu key (fig. 5).
How to add and delete the camera
How to add the camera
1.
In the menu, select
2.
From the list, select the camera which is to be added and press OK. Next
choose camera adding (fig. 6).
3.
When you can see a command on the screen (fig. 7), press SET on the
camera (7, fig. B).
4.
When you have successfully paired the camera, the display unit will
display image from the camera in real time.
5.
While using the device, the camera must be connected to the source
of power.
How to delete the camera
1.
In the menu, select the icon
2.
From the list select the camera which is to be deleted and press OK.
Next choose camera deleting (fig. 8).
Lullabies
1.
In the menu, select
icon and press OK.
and press OK.
icon and press OK.
‑ 11 ‑ EN