BABY MONSTERS ISOFIX Instrucciones De Uso página 10

4.DO NOT add or modify this product in any way, as this could result in dangerous situations.
5.DO NOT use second-hand product if you do not know their history.
6.DO NOT allow the ISOFIX BASE to come into contact with corrosive sub stances, e. g.:batter acid.
7.Ensure that no part of the seat is trapped in door or a folding rear seat,
ensure that it is correcctly latched in its upright position.
8.Juggage and other heavy objects should be securedi the car.
Losse objects are liable to cause injury in the event of an accident.
9.When the ISOFIX lower anchorages of the Vehicle to avoid in the event of an accident.
10.When the ISOFIX BASE not in use, please store it in safe and clean place,
avoid placing any heavy objects on top of it.
11.If you travel with passengers using both the front and the rear passenger seats,
the lighter occupants should be in the rear and the heavier occupants in the front of the vehicle.
12.Replace the ISOFIX BASE after an accident.
13.Use only original parts approved by the manufacturer.
14.Please read this instruction manual carefully and keep it for future reference.
Check-List before driving
1.This is an ISOFIX system.
2.It is only suitable for use in cars equipped eith ISOFIX acchor points.
For more information, please check your car owner's manual.
3.Check to make sure your car is listed on the approved car fitting list.
4.Check whether the fold-down rear seats are locked into position.
5.ISOFIX system installation Check-List before Driving:
Make sure your child is safetly fastened by the infant carrier buckle harness system and
in right shoulder height position befre driving.
Make sure the infant carrier handle is adjusted to the position for installation in the car before driving.
Make sure the redbound bar "click" into the ISOFIX BASE rear slots x 2 before driving.
Make sure the ISOFIX Connectors (Left & Right) "click" into the lower anchorage system of the car,
showing in green x 2 before driving.
Make sure the infant carrier side part in yellow round stickers x 2, infant carrier side part in green round
stickers x2. All matching the ISOFIX BASE yellow and green round stickers positions before driving.
Make sure the ISOFIX BASE frontal red press button pushed outwards showing in green.
Make sure the infant carrier is fully locked with the ISOFIX BASE before driving.
Make sure the ISOFIX BASE support leg touches the floor pan of the car showing
in green before driving.
Maintance & Environment
1.Please keep the ISOFIX BASE clean.
2.Do not use any lubricants or aggressive cleaning agents on this product.
3.Please keep all plastic packaging materials out of reach of your child to avoid the risk of suffocation.
4.For environmental reasons, when you have stopped using this product,
we ask that you dispose of the product in the proper waste facilities in accordance with local legislation.
English