Publicidad
Idiomas disponibles
Idiomas disponibles
PERSONAL PROTECTIVE EQUIPMENT TO WEAR WHILE OPERtmNG PNEUMATIC TOOL
Lt
Failure to observe the following wamings may result in physical injuiy and/or disease.
•
(t)
ALWAYS WEAR HEARING PROTECTION WHILE OPERATING PNEUMATIC TOOL
ALWAYS WEAR E YE PROTECTION WHILE OPERATING PNEUMATIC TOOL OR PERFORMING
MAIN TENANCE JOBS
ALWAYS WEAR PROTECTIVE GLOVES AGAINST PH YSICAL AGEN TS WHILE OPERATING
o
PNEUMATIC TOOL
�
ALWAYS WEAR SAFE TY SHOES
Lt
Additional persona!
protective
the values exceed the
limits
WEAR AN TI-VIBRATION GLOVES WHILE OPERATING PNEUMATIC TOOL FOLLOWING A
SPECIALLY CONDUCTED SURVEY OF LEVEL OF DAILY EXPOSURE OF HAND-ARM SYSTEM TO
VIBRATI ON
PRODUCT SPECIFICATIONS
SOCKET DRIVE
BOLT CAPACITY (8.8)
BOLT CAPACITY (12.9)
FREE SPEED
MAXIMUM TORQUE
AIR INLET
MAXIMUM PRESSURE
MAXIMUM AIR CONSUMPTION
WEIGHT
LENGTH
HAMMER DEVICE TYPE
SOUND PRESSURE LEVEL
SOUND POWER LEVEL
VIBRATION LEVEL
KEY TO SYMBOLS
a: air inlet 1/4" GAS
b: impact wrench trigger
e: rotation reversal pin
d: min. - max. torque selector
e: suspension device
f: oil lubrication
Air supply connection
For optimal use of the pneumatic
pneumatic tool with
clean,
condensate-free air
the mechanical parts and may damage the tool.
equipment to wear according to the values found in the environrnental hygiene/risk analysis survey
under current regulations.
3/8"
M16 - 24 mm
M14 - 21 mm
9000 rpm
515 Nm
1/4"
GAS
6.2 bars
122 I/min
1.3 kg
110 mm
SINGLE HAMMER
100 dB(A) (EN ISO ·15744)
111 dB(A) (EN ISO ·t5744)
8 .6 m/s
(ISO 28927-2)
2
tool,
always keep to a maximum p1ressure of 6.2
(picture 2).
Excessive
bars,
as measured at the tool inlet. Feed the
l y high pressure or humidity in supply air results in shorter life for
,
if
Publicidad
