Publicidad
Note – Adhesive surface
• Ensure that the mounting surface to which the adhesive strip is to attach (such as the
back of a smartphone) is free of dust and grease. Use a suitable cleaning agent from a
specialised dealer to clean the surface.
• Various environmental factors such as ambient humidity, sunlight or cold can impair
the durability of the adhesive pad.
• We cannot guarantee that residue will not be left on the mounting surface after the
adhesive pad is removed.
• Remove the protective foil from the adhesive side of the inductive charging receiver;
then press the inductive charging receiver on the adherend surface (for example, back
of a smartphone) for a few seconds. (A)
4.1 Mounting options
You have two mounting options, depending on whether or not you protect your terminal
device with a cover/case.
• Simply squeeze the inductive charging receiver in between your terminal device and its
case or cover. (D)
• You can affix the inductive charging receiver to the back of your terminal device using the
receiver's adhesive strip.
4.2 Getting started
• Connect the Micro-USB/USB Type-C plug of the inductive charging receiver to the Micro-
USB/USB Type-C input on your terminal device. (B)
• When fitting the inductive charging receiver between your terminal device and its case,
or when attaching it to the back of your terminal device, make sure that the cable is laid
such that there is enough free play to pull out the plug if the product is not being used.
(C)
• Before affixing the inductive charging receiver, check whether the charging coil is
positioned correctly, in order to sustain contact on the inductive charger used.
Warning
• Only use suitable charging devices or USB connections for charging.
• As a rule, do not use charging devices or USB connections that are defective and do
not try to repair them yourself.
4
Publicidad
