Korona 46221 Manual De Instrucciones página 27

Assembly of the Grill
1. Attach the 4 rubber feet (8) to appliance (rear side).
2. Attach the windshield (1) by inserting the prongs into the respective openings of the housing (2). Make
sure to properly secure it.
3. Place the removable aluminium reflector tray (3) into the barbeque enclosure (housing) (2).
4. Fasten the aluminium reflector tray (3) with the screw and nut (11). The drilling holes are at the front, on
the left of the operating control.
5. Insert the two prongs of the operating control (5) into the drilling holes of the appliance housing (2). Make
sure when inserting the thermostat (5) that it is properly positioned into the guides on both sides and
press it down firmly until it clicks into place.
Instruction Manual
ENGLISH
27