Descargar Imprimir esta página

Standard Accessories - HIKOKI AC 18DA Instrucciones De Manejo

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 59
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
Blinks ;
Output suspended due to failure or malfunction.
The problem may be the battery so please
contact your dealer.

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package contains the
accessories listed on page 227.
Standard accessories are subject to change without notice.
APPLICATIONS
○ Applying in ducts, kitchens and bathrooms, exterior
walls, etc.
○ Filling joints of exterior walls or tile
○ Reinforcing airtightness and waterproofi ng
○ Joining and attaching plate glass, and repairing
aquariums
SPECIFICATIONS
1. Power tool
Model
Voltage
Dispensing speed
Maximum dispensing
force
Battery available for
this tool*
1
Weight*
2
*1 Existing batteries (BSL3660/3620/3626, etc.) cannot be
used with this tool.
*2 According to EPTA-Procedure 01/2014
NOTE
Due to HiKOKI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
2. Battery
Model
Voltage
Battery capacity
Available cordless
products*
Available charger
*
Please see our general catalogue for details.
AC18DA
18 V
0–14 mm/s
3000 N
Multi volt battery, BSL18 Series
2.3 kg (BSL1820M, 300 ml)
3.4 kg (BSL36B18, 600 ml)
BSL1820M
18 V
2.0 Ah
Multi volt series, 18 V product
Sliding charger for lithium ion
batteries
3. Charger
Model
Charging voltage
Weight
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger's power cord to the receptacle.
When connecting the plug of the charger to a receptacle,
the charge indicator lamp will blink in red (At 1- second
intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger as shown in
Fig. 4 (on page 2).
3. Charging
When inserting a battery in the charger, the charge
indicator lamp will blink in blue.
When the battery becomes fully recharged, the charge
indicator lamp will light up in green. (See Table 1)
(1) Charge indicator lamp indication
The indications of the charge indicator lamp will be as
shown in Table 1, according to the condition of the
charger or the rechargeable battery.
11
English
UC18YSL3
14.4 V–18 V
0.6 kg

Publicidad

loading