Joie calmi lie-flat car cot Manual De Instrucciones página 6

Attaching Lie-flat car cot to the Base
see images -
9 16
1. Pull up the canopy as illustrated while pressing the buttons on both
sides.
9
2. Check to make sure the handle is secure before placing the child in
-1
the lie-flat car cot.
10
!
Make sure that the handle is in the correct position of use before
carrying or lifting.
3. Install the lie-flat car cot onto the base
indicators should turn green when the lie-flat car cot and base are
securely connected.
12
!
Please check that the mesh at the bottom of the lie-flat car cot is
fixed properly before installing lie-flat car cot.
!
Check that the lie-flat car cot is locked onto the base by lifting the
handle.
4. Press the ISOFIX adjustment and push the base back until it comes
in contact with the vehicle seat backrest.
5. To remove the lie-flat car cot, squeeze the infant carrier release
-1
button on the base , then lift the lie-flat car cot up.
13
6. When lie-flat car cot is installed on base, the correct installation is
shown in . The incorrect installation is shown in
14
7. To remove the base from the vehicle seat, push the secondary lock
-1
buttons first and then press the ISOFIX releasing buttons
16
on the ISOFIX connectors before removing the base from the vehicle
seat.
16
5
, the child restraint
11
11
-2
13
.
15
-2
16
6