VONROC CR505DC Traducción Del Manual Original página 9

Model No.
Rechargeable Battery pack
Battery charging time
Voltage cigarette lighter plug
Power cigarette lighter plug
Max. pressure
Air output
No load speed
Continuous operation
Sound pressure level L
PA
Sound power level L
WA
* For optimal lifetime performance, do not operate
device uninterrupted for more than 10 minutes;
then wait for 10 minutes.
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-4.
1. Handle
2. Display
3. Machine
4. Battery LED indicator
5. Small valve adapter
6. Large valve adapter
7. Valve adapter for balls
8. Valve adapter for 'Presta' bicycle valves
9. Valve adapter for 'Schrader' bicycle valves
10. Valve adapter for 'Dunlop/Blitz' bicycle valves
11. Cigarette lighter plug
12. Cigarette lighter plug cable
13. Power plug
14. Connection valve
15. Air pressure hose
16. USB type-C plug*
17. USB cable*
18. USB type-A plug*
19. Power connector
20. USB type-C connector*
21. On/off switch
22. Air pressure outlet connector
23. Clamping lever
24. LED indication ring
25. Car preset button
26. SUV preset button
27. Display
28. Measuring unit indicator
WWW.VONROC.COM
CR505DC
12V Li-ion 2.0Ah
3.5 hours
12V 10A
120W
10 bar / 145 PSI
30L/min
18.000/rpm
max. 10 min*
71.2 dB(A), K=3dB(A)
82.2 dB(A), K=3dB(A)
29. Unit change button
30. Increase target pressure button
31. Reduce target pressure button
32. Start/stop button
* USB Type-C® and USB-C® are trademarks of USB
Implementers Forum.
3. OPERATION
First use (Fig. A)
Do not cover the vents.
Do not operate the device in dusty
environments. Doing so poses a fire hazard
and could damage the device.
Place the product on a level, non-flammable
surface. Depending on the inflatable you can use
the connection valve (14) directly or along with one
of the included valve adapters (5-10).
For inflatables with counterpressure (e.g. partly
filled car tyre): Switch on the product before
connecting the connection valve (14) to the tyre.
This product is not suitable for continuous operation.
It was developed to produce air pressure, not air
volume. Do not use the product for longer than 10
minutes without interruption to prevent overheating
and damage to the device. Afterwards allow to cool
for a minimum of 10 minutes.
Charging the machine (Fig. B, C)
The machine must be charged before first
use.
• Plug the USB type-C plug (16) into the USB
type-C connector (20) on the machine.
• Plug the USB type-A plug (18) into an power
adapter (not included) or device (e.g. computer,
powerbank) with suitable female USB connector.
Please note that the device should be able to
deliver constant 5V 2A power.
• The Battery LED indicator (4) will lighten up and
show the charging status.
EN
9