Waeco CoolBreeze CB-1200-AC Instrucciones De Montaje página 41

IA_CB-1200.book Seite 41 Montag, 18. April 2005 4:15 16
CB-1200
➤ Select an area at the centre on the roof between two longitudinal
profiles.
➤ Use a felt pen to mark a square opening of 400 mm x 400 mm.
➤ Carefully cut an opening on the roof using a keyhole saw or a similar
tool. Make sure no electrical power cables are damaged.
Installation in an existing sunroof opening
The fresh air cooling system can be installed in existing sunroof openings
whose dimensions range from 400 x 400 mm to 435 x 435 mm.
WAECO International only assumes liability for parts included in the scope
of delivery. The validity of the warranty expires if the device is installed
together with third-party parts.
Please observe the static of the vehicle and the sealing of all openings
made during the installation when installing the fresh air cooling system.
Removing the sunroof (2 and 3 , page 3)
➤ Remove all screws and fixtures of the existing sunroof.
➤ Take out the sunroof.
➤ Remove the sealant around the opening using a scraper or similar tool.
➤ Use a sealant to seal the bore holes.
Dispose of all waste material, glue, silicone and seals separately. Observe
the disposal guidelines in the process.
All manuals and user guides at all-guides.com
Installing the fresh air cooling system
41