Manuales relacionados para Brigade TX
Resumen de contenidos para Brigade TX
- Página 1 Digital Wireless System User & fitting guide User Guide & montage User & Einbau Anleitung Utente di montaggio e guida Guía de usuario y montaje User & montage handleiding Part No. 4286C...
- Página 2 Connections Connexions/Verbindungen/Connessioni/Conexiones/Aansluitingen 3 AMP 3 AMP IP67 FUSE FUSE Red: Power Connect to Reverse signal 12/24Vdc Camera connection Rouge: Pouvoir Connecter au signal de marche arrière 12/24 V c.c. Connexion à caméra Rot: Macht Anschluss an Rückwärtsfahrtsignal 12/24 V DC Kameraanschluss Rosso: Potenza Collega a segnale di retromarcia 12/24 Vdc...
- Página 3 Installation Installation/Zum Installieren/Montaggio/Instalación/Om te installeren...
- Página 4 Verde: Accoppiamento completato Verde: Emparejamiento Verde: Emparejamiento concluido Groen: Koppeling Groen: Koppelen voltooid LED off: TX no power Red: Power on, not paired Rouge: Emetteur hors tension Rouge: Sous tension, sans appariement Rot: Sender ohne Strom Rot: Eingeschaltet, kein Pairing...
- Página 5 RX/ Controleer zekering ontvanger Move TX closer to RX (p7)/ Rapprocher l'émetteur du récepteur (p7)co/ Sender näher zum Empfänger bringen (S. 7)/ Avvicina trasmettitore a ricevitore (pag. 7)/ Mover el TX más próximo al RX (p.7)/ Zet transmitter dichter bij ontvanger (p7)
- Página 6 820+/-20mA @12V nahme von TX Consumo elettrico RX 220+/-20mA @12V Momentane Stromauf- 220+/-20mA @12V Potenza di uscita TX 12Vdc +/- 10% to camera nahme von RX Dimensioni 113.7(w) x 114.3(h) x 30.8(d)mm Ausgangsleistung TX 12Vdc +/- 10% to camera Ambiente TX...
- Página 7 • Ensure correct camera view is displayed before manoeuvering! • Under specific power cycles it is possible for the RX to NOT pair automatically with a TX (no picture) or pair with an alternative TX. Re-pair using the Pairing button.
-
Página 8: Fcc Statement
FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.