General Operation; Cd/Usb - auna DiscoFever Manual De Instrucciones

EN
Microphones: Connect the microphones to the MIC 1 and MIC 2 connectors
on the rear panel. Switch on the microphones with the switches on the
microphones. The microphone signals are mixed with the music playback
from CD/CD+G. To prevent feedback loops, do not point the microphone
capsules towards the speakers and do not cover the capsules with your
hands.

GENERAL OPERATION

Switch the unit on and off: Switch the DiscoFever on and off with the
POWER button.
Set the master volume: Use the MASTER VOL button to adjust the volume.
Select the audio source: Press the FUNCTION button to select CDG, USB
or BT.
Switch the light effect on and off: Use the LIGHT I/O button to switch the
integrated light effect on or off.

CD/USB

Open the CD compartment and put in a CD (printed side up). Then close the
CD compartment again. Or: Connect a USB data carrier with MP3 files to the
USB port.
After a short moment in which the unit reads the inserted medium, a
corresponding message appears on the display. If the medium cannot be
read or if none has been inserted, "No Disc" appears on the display.
Use the PLAY/PAUSE, NEXT/PREVIOUS and PAGE+/- buttons (the latter in
stop mode) to control playback.
Repeat function
During playback, press PROGRAM/REPEAT several times to select the
playback modes REPEAT 1 (repeat current track) - REP FOLDER (for MP3
CDs/USB: repeat current folder) - REP ALL (repeat all) - or NO REP (repeat
function off).
23