Configuring Snooper+ Bt For Windows Bluetooth Environment - wow! Snooper+ Traducción Del Manual Original

7.2 Configuring Snooper+ BT for Windows Bluetooth environment
Note!
This procedure is only necessary if problems are encountered when connecting to the Snooper+ device in the
WOW! software.
Please only perform steps 1-2 with the iQ 150 Generation 24 diagnosis system. There should be no Snooper or
Snooper+ device present in the Bluetooth environment with this device.
2
1
33
All manuals and user guides at all-guides.com
1. Open Bluetooth environment.
2
1
2. Delete all unused WOW! Snooper devices or VCI devic-
3. Connect the Snooper+ device to a power supply, e.g.
4. Click on "Add device"
5. Select the Snooper+ with the correct serial number
6. Confirm the added device in the following window.
7. Configure the Snooper+ BT in the WOW! software. See
1
Click in the task bar on the "Bluetooth symbol"
"Display Bluetooth network devices"
es with a right click and "Remove device"
the diagnosis connector in the vehicle.
.
2
The system searches for BT devices within range.
The serial number can be found on the Snooper's data
plate.
"4.2 Setting up connections to Snooper+" on page .
and
1
.
2
.
1
.
1