Publicidad
Idiomas disponibles
Idiomas disponibles
EN
14
USE AND OPERATION
•
Connect the speakers to the + and – terminals on the rear panel of the
amplifier.
•
Plug the mains lead in and switch the amplifier on once you have
checked all connections.
•
Switch the audio sources on and adjust the master volume to the
required level.
Karaoke
•
Plug a mic into MIC1 or MIC2 socket on the front panel.
•
Before you use the mic, make sure that it is switched off and the MIC
volume button is set to the minimum.
•
Connect the microphone, switch it on and adjust slowly the volume and
the echo.
•
If you don't use the unit any longer, switch the amplifier off and
disconnect it from the mains.
Signal Sources and their Connections
•
Connect a DVD-player or a CD-player to the terminal AUDIO INPUT or
a data storage unit to the USB-interface or insert a SD-memory card in
the suitable slot or activate the BT function on your smartphone.
•
Select the active signal source by pressing the INPUT button until the
desired input source is displayed.
•
Use the MP3 CONTROL-function for controlling the files on a connected
data storage unit.
•
If you wish to use the karaoke function of this device, insert one or two
microphones into MIC1 and MIC2. Their signals are going to the signal
output too.
BT Connection
•
The KARAOKE-STAR2MKII is only discoverable when the input selected
is BT.
•
After selecting BT input mode on the KARAOKE-STAR2MKII, turn on
the BT function on the cell phone and search the KARAOKE-STAR2MKII.
Its BT device name is "KARAOKE-STAR2MKII". Pair and connect after
search. There is no pairing code.
Publicidad
