weasy igloo8 Manual De Instrucciones página 8

FEATURE
Quick ice making
²
Prompt when the ice is full and water is insufficient
²
Bullet ice
²
9 pcs ice can be made in 8 minutes.
²
Automatic cleaning function
²
1. During transportation, do not tilt the machine more than 45 degrees, do not reverse the machine. This may damage
the compressor and the sealing system.
2. Remove all packing materials, check the machine carefully and make sure that the machine, power cord and plug
are normal.
3. The machine should be on a level surface. To ensure sufficient ventilation, the distance of the back of ice maker to
the wall should be at least 150 mm, it should be away from the oven, radiator or other heat source.
4. Before using the machine for the first time, place the machine and leave the transparent cover open for at least two
hours.
5. Make sure that the home voltage is consistent with the voltage indicated by the machine.
6. Distilled water is not allowed. Mineral water is recommended.
CONTROL PANEL OPERATION
ON/OFF：Power Supply
ICE FULL: water full alarm
ICE MAKING: ice making
1. Plug in the power supply, the "ICE MAKING" indicator flashes, and the machine will start the deicing function.
Press the ON/OFF button, the "ICE MAKING" indicator light is always on and then the ice block will be made
automatically. After the ice making is completed, the deicing will be carried out, and then the ice shoveling function
will be entered, and so on.
2. ADD WATER: water shortage alarm: when the light is red, it means water shortage in the water tank. You need to
add water and press the POWER button to restart the machine.
3. ICE FULL: ice full alarm. When the ice reaches the maximum amount of ice storage container, the "ICE FULL"
light flashes and the machine stops. At this time, the ice needs to be poured out. When the ice position is lower
than the full sensor position, the machine will restart automatically.
CLEAN: CLEAN button
ADD WATER: water shortage alarm